High-Pressure / Ultrahigh-Pressure Pumps
Plunger Pump
SUGINO PUMP
Stand-alone pumps are also available. Pumps can be categorized into three series: small, lightweight JPSP series, JPKP series with built-in gears, and high/low pressure switchable GJP series. All the series are based on a durability-oriented design along with a focus on the long-life of internal parts, making them suitable for continuous operation.
JPSP Series – Compact and Lightweight
Lightweight
Max.Discharge Pressure : 245MPa
Max.Discharge Rate : 108L/min
Driving Power : 30kW
JPKP Series – Built-in gears type
Max.Discharge Pressure : 200MPa
Max.Discharge Rate : 228L/min
Driving Power : 90kW
GJP Series – High/Low pressure switchable type
Max.Discharge Pressure : 70MPa
Max.Discharge Rate : 238L/min
Driving Power : 130kW
ENGINE DRIVEN PUMP UNIT
Engine driven pump units are plunger type pump used for outdoor work like civil engineering and construction sites where no electrical power supply is available.
JPHP
All-round-type ultrahigh-pressure pump units for multiple purposes from cleaning to chipping.
There are many variations, allowing you to choose the optimal model according to your needs.
-Max.Discharge Pressure : 280MPa
-Max.Discharge Rate : 120L/min
-Applications : Plant facility cleaning, peeling, chipping, etc
-4 ton truck mountable
-The pressure and the flow rate of stand-alone JPHP pumps can be changed to those of another JPHP series model by replacing the head and the pressure regulator.
JPHP / HI-JET3000GT|JPHP
An eco-friendly, high-output engine is adopted to allow this high-end ultrahigh-pressure pump unit to have a large flow rate and be environmentally conscious at the same time.
This type of pump unit is clean and powerful and will demonstrate its outstanding performance in chipping works of concrete structures.
Max.Discharge Pressure : 280MPa
Max.Discharge Rate : 45L/min
Applications : Peeling, chipping, etc
Sound proof
4 ton truck mountable
Automatic operation : This feature controls the rotation speed of the engine automatically to achievethe chosen pressure setting.
GP11 / HI-JET3000ST
Lightweight and compact pump units that can be mounted on a 3-ton truck.
Best suited for a narrow space such as asbestos removal on demolition site and white line peeling on roads.
Max.Discharge Pressure : 245MPa
Max.Discharge Rate : 28L/min
Applications : Peeling, chipping, etc
Sound proof
3 ton truck mountable
Automatic operation : This feature controls the rotation speed of the engine automatically to achievethe chosen pressure setting.
JPHP / HI-JET3000DT
Ultrahigh-pressure, large flow rate pump units equipped with two pumps.
The most effective chipping work to concrete structure can be realized.
Max.Discharge Pressure : 245MPa
Max.Discharge Rate : 78L/min
Applications : Chipping, etc
Simple Sound proof
Ultra-high pressure and large flow rate specifications
Automatic operation : This feature controls the rotation speed of the engine automatically to achievethe chosen pressure setting.
JPKP / HI-JET2000, JPHP / HI-JET3000
The most versatile model for water jet blasting operations based on a superior balance between pressure and flow rate for peeling, as well as the chipping and cutting of concrete.
This model is lightweight and soundproof and can be used in urban areas without causing noise issues.
Max.Discharge Pressure : 300MPa
Max.Discharge Rate : 27L/min
Applications : Peeling, chipping, etc
Sound proof
4 ton truck mountable
Automatic operation : This feature controls the rotation speed of the engine automatically to achievethe chosen pressure setting.
GP11
Compact pump units equipped with an engine that is direct-coupled to a pump with built-in gears.
Max.Discharge Pressure : 33MPa
Max.Discharge Rate : 220L/min
Applications : Plant facility cleaning, water and sewer cleaning, etc
4 ton truck mountable
JPKP
The most lightweight engine-driven pump unit.
Max.Discharge Pressure : 170MPa
Max.Discharge Rate : 50L/min
Applications : Plant facility cleaning, etc
3 ton truck mountable
JCP500
High pressure, large flow rate pump units equipped with a five-plunger pump.
Max.Discharge Pressure : 150MPa
Max.Discharge Rate : 330L/min
Applications : Strong cleaning, chipping, etc
High pressure High flow rate spec.
JCP170
Large flow rate pump units that can be used for a wide variety of applications such as the cleaning of large diameter or long length tubes, or the chipping of deteriorated concrete.
Max.Discharge Pressure : 82MPa
Max.Discharge Rate : 200L/min
Applications : Plant facility cleaning, large-diameter tube cleaning, etc
High / Low Pressure Switchable Type ;
It is possible to switch between high pressure and low pressure with a large flow rate by a single handle operation according to the application.
GP11
Lightweight and compact pump units that can be mounted on a 3-ton truck.
Max.Discharge Pressure : 77MPa
Max.Discharge Rate : 180L/min
Applications : Plant facility cleaning, water and sewer cleaning, etc
3 ton truck mountable
High / Low Pressure Switchable Type :
It is possible to switch between high pressure and low pressure with a large flow rate by a single handle operation according to the application.
MOTOR DRIVEN PUMP UNIT
The motor-driven pump unit is a plunger-type pump unit primarily used as equipment installed in factories.
It is also capable of outdoor and dust-proof use, making it suitable for various environmental conditions.
A wide variety of models, based on durability-oriented design in preparation for continuous operations, are available from 6 MPa to 200 MPa.
JCP075
Middle-Size pump units that can be used for various applications from gun cleaning to cleaning equipment. Sufficient flow rate can be secured even in a high-pressure range.
-Max.Discharge Pressure : 200MPa
-Max.Discharge Rate : 400L/min
-Driving Power : 75kW
-Applications : Temporary equipment cleaning, plant facility cleaning,etc
JCP170
Large flow rate pump units suitable for automatic cleaning. Combination with a wide variety of cleaning equipment to deliver overwhelming cleaning effect is possible
Max.Discharge Pressure : 200MPa
Max.Discharge Rate : 600L/min
Driving Power : 170kW
Applications : Plant facility cleaning, middle-size polymerization tank cleaning, etc.
JPHP
Ultrahigh-pressure pump units that can be pressurized up to 280 MPa. The direct coupling system with a motor allows them to be installed in a small area.
Max.Discharge Pressure : 280MPa
Max.Discharge Rate : 130L/min
Driving Power : 160kW
Applications : Ultrahigh-pressure cleaning, peeling, chipping, etc.
JCP300
Triplex plunger pump units with large flow rate suitable for continuous operation. Best suited for automatic cleaning of large-size polymerization tanks and descaling of billets.
Max.Discharge Pressure : 200MPa
Max.Discharge Rate : 1300L/min
Driving Power : 300kW
Applications : Large-size polymerization tank cleaning, descaling, etc.
JCP500
There are five-plunger pump units with large flow rate suitable for bloom descaling, jet needling, and water atomization.
Max.Discharge Pressure : 200MPa
Max.Discharge Rate : 2000L/min
Driving Power : 600kW
Applications : Descaling, water atomization,etc.
Various customizations available
We also offer customization options to suit your needs, such as portable carts, indoor and outdoor use, and soundproof covers.
Intensifier Type Pump
WATER JET PUMP
Intensifier-type pump units that can generate ultrahigh-pressure water up to 600 MPa.
Intensifier-type pump units that can generate ultrahigh-pressure water up to 600 MPa.
Hydraulic ultrahigh-pressure pump units that can generate ultrahigh-pressure water
up to 600 MPa. Using a hydraulic-driven intensifier (booster), this unit can generate
ultrahigh-pressure by intensifying the pressure of the secondary side 14 to 20 times higher
than the primary side hydraulic pressure.
Max.Discharge Pressure : 600MPa
Max.Discharge Rate : 13.5L/min
Max.Required power : 77kW
Features
- Continuous operation is possible.:Ultrahigh-pressure pump units with excellent durability capable of long continuous operation at a ultrahigh-pressure up to 600 MPa.
- Various Models Available:A wide variety of models are available from 19kW to 77kW. Proper model can be selected according to application.
- Long-lasting:Features a new intensifier that makes it possible to deliver a high flow rate while maintaining a lightweight, compact size. Maintenance is easy, and the system’s long life helps keep running costs down.
- Stand-alone Pump Operation Possible:ポA control panel enabling stand-alone pump operation is fitted as a standard equipment. The control panel is equipped with operation and display functions for immediate use once the system is delivered, with due consideration paid to safety in the design. Operational control using external signals is also possible.
- Excellent Operability:Offers excellent operability through the use of a touch panel. Besides a monitoring function which allows the user to monitor the state of the pump, the system also comes equipped with a troubleshooting function to allow a quick response to be provided when an alarm sounds.
Application Examples
Cardboard cutting
Urethane cutting
Trimming of automotive interior materials
Glass profiling
Precision cutting of artificial marble
Packing profiling
Instrument panel trimming
AQUA SERVO PUMP: Servo motor driven type / Ultrahigh-pressure pump units
Aqua Servo Pump are ultrahigh-pressure pump units that can generate ultrahigh-pressure water up to 600MPa.
Stable pressure waveforms from extremely low pressure to ultrahigh-pressure can be obtained by servo energy saving control.
Max.Discharge Pressure : 600MPa
Max.Discharge Rate : 4.4L/min
Max.Required power : 47kW
Energy-saving model
Features
Energy Saving
The efficiency of the hydraulic circuit is improved by the dual directional control of the servo motor. The power consumption, water consumption, and hydraulic fluid consumption can be reduced. (compared to our company’s conventional models)
Reduction Control of Pressure Fluctuation is Possible
A constant pressure can be maintained through feedback control of servo motor rotation.
High Quality Piercing is Possible
Delamination or peeling of difficult-to-cut materials such as CFRP can be reduced by the stable control of low pressure.
Long Life of High-pressure Accessories
Impact pressure at the time when the intensifier switches or injection stops is suppressed to reduce impact loading to the high-pressure line.
Application Examples
■ Objects whose cutting surface roughness must be Highly Accurate
■ Piercing of the difficult-to-cut materials
■ Installation in facilities where the supply of hydraulic fluid is restricted
SERVO JET PUMP: Servo motor driven type / Ultrahigh-pressure pump units
Clean ultrahigh-pressure pump units with no hydraulic oil is used.
Best suited for cutting, emulsification,and cleaning of food, pharmaceuticals, semiconductors,etc.
Max.Discharge Pressure : 600MPa
Max.Discharge Rate : 4.4L/min
Max.Required power : 47kW
Clean/ Oil-free
Features
High efficiency and energy saving: Due to the direct drive system using a ball screw, the pump operates with high efficiency and does not require cooling water. When the injection stops, the load on the servo motor decreases, which also reduces power consumption.
Easy maintenance: No need to refill or replace hydraulic fluid, and the pump structure is extremely simple. The amount of maintenance work can be significantly reduced.
Low noise: Driven by a servo motor, it operates with low noise, providing a better working environment.
Application Examples
■ Emulsification of cosmetics and pharmaceuticals,
depolymerization, high pressure crystallization
■ High-pressure deburring of semiconductor parts
■ Cutting of printed circuit board and electronics parts
■ Cutting of Textile and disposable diaper
■ Cutting, sterilization, and denaturalization of food